THIS SAE 100R15 STEEL WIRE SPIRAL RUBBER HOSE IS STRICTLY MANUFACTURED IN ACCORDANCE WITH THE SAE J517 STANDARD. IT FEATURES A THREE-LAYER COMPOSITE STRUCTURE CONSISTING OF AN OIL-RESISTANT SYNTHETIC INNER TUBE, MULTIPLE BI-DIRECTIONAL CROSS-WOUND HIGH-STRENGTH STEEL WIRE SPIRAL REINFORCEMENT LAYERS, AND A WEATHER- AND WEAR-RESISTANT OUTER COVER. CAPABLE OF WITHSTANDING A MAXIMUM WORKING PRESSURE OF UP TO 42MPA AND MILLIONS OF HIGH-FREQUENCY PRESSURE PULSES, THE HOSE OFFERS EXCELLENT FLEXIBILITY WITHOUT BULGING OR DELAMINATION DURING BENDING. SUITABLE FOR PETROLEUM-BASED HYDRAULIC FLUIDS WITH AN OPERATING TEMPERATURE RANGE OF -40°C TO 121°C, IT PROVIDES SUPERIOR RESISTANCE TO OIL, UV RAYS, AND WEAR. BALANCING ULTRA-HIGH PRESSURE CAPACITY WITH INSTALLATION BENDING FLEXIBILITY, IT SUPPORTS CUSTOM CRIMPED ASSEMBLIES WITH VARIOUS STANDARD FITTINGS.
| PRODUCT NAME | NOMINAL BORE | SPECIFICATION | INSIDE DIAMETER （ID）mm | OUTSIDE DIAMETER （OD）mm | MAXIMUM WORKING PRESSURE W.P | MINIMUM BURST PRESSURE B.P | MINIMUM BEND RADIUS Min.B.R | ||
| mm | inch | min | max | min | max | Mpa | Mpa | mm | |
| DN10 | 10 | 3/8 | 9.3 | 10.1 | 23.3 | 23.3 | 42 | 84 | 168 |
| DN13 | 13 | 1/2 | 12.3 | 13.5 | 26.8 | 26.8 | 42 | 84 | 168 |
| DN19 | 19 | 3/4 | 18.6 | 19.8 | 36.1 | 36.1 | 42 | 84 | 168 |
| DN25 | 25 | 1 | 25.0 | 26.4 | 42.9 | 42.9 | 42 | 84 | 168 |
| DN32 | 32 | 1 1/4 | 31.4 | 33.0 | 51.5 | 51.5 | 42 | 84 | 168 |
| DN38 | 38 | 1 1/2 | 37.7 | 39.3 | 59.6 | 59.6 | 42 | 84 | 168 |
